CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: water jet cam

Posted by Les Newell
on 2006-09-01 09:32:25 UTC
Hi John,

Unfortunately SheetCam can't do that. There is a text wizard available
for Mach that does pretty much what you want. Alternatively have a look
at DesignCad Express from <http://www.upperspace.com/>. It has built in
single-line fonts. You can then use SheetCam or Lazycam to convert the
drawings to g-code.

Les


John Dammeyer wrote:
> Hi Les,
>
>
> So my question is, can SheetCAM create letters from a DXF file where the
> tool is an engraving bit and the tool path is the centre of the letter. I
> need speed here. I currently use a hand held vibratory engraver and can
> whip out 12 sets of two digit serial #s very quickly and the numbers are
> quite legible. I don't want the G-Code to follow the outline of a letter.
>
> Does this make sense?
>
> John Dammeyer
>

Discussion Thread

afogassa 2006-08-30 17:17:23 UTC water jet cam Peter Renolds 2006-08-31 09:11:50 UTC Re: [CAD_CAM_EDM_DRO] water jet cam afogassa 2006-08-31 13:09:23 UTC Re: water jet cam Jon Elson 2006-08-31 15:44:18 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet cam Les Newell 2006-09-01 05:46:09 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet cam John Dammeyer 2006-09-01 07:52:26 UTC RE: [CAD_CAM_EDM_DRO] Re: water jet cam Les Newell 2006-09-01 08:38:17 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet cam John Dammeyer 2006-09-01 09:09:27 UTC RE: [CAD_CAM_EDM_DRO] Re: water jet cam Les Newell 2006-09-01 09:32:25 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet cam afogassa 2006-09-01 18:30:12 UTC Re: water jet cam