Re: Extending the length of ball screw
Posted by
Horace, T.L.Ho
on 2006-10-24 05:03:46 UTC
Hi Dave,
32mm in dia will be strong enough. I use the same diameter with the
original lead screw on my mill (it looks 90% like bridgeport).
Horace.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@...> wrote:
32mm in dia will be strong enough. I use the same diameter with the
original lead screw on my mill (it looks 90% like bridgeport).
Horace.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@...> wrote:
>can get
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Horace, T.L.Ho"
> <skyfroghorace@> wrote:
> >
> > Hi,
> >
> > I need a ball screw of total length around 1000mm, but best I
> > is about 500mm only, so I need to add some length at both endsfor
> > mounting the screw on the table. Have anyone done this beforeany helps
> > would be much appreciated.diameter
> >
> > Regards,
> >
> > Horace.
>
>
>
>
>
>
> You will find that each larger diameter is available in a longer
> length. This is due to the inherent strengths of the larger
> screws.rope
>
> if you make a small diameter too long, it will whip like a jump-
> and moderate rpms.
>
> Dave
>
Discussion Thread
Horace, T.L.Ho
2006-10-23 06:58:09 UTC
Extending the length of ball screw
hannu venermo
2006-10-23 09:15:14 UTC
Re: [CAD_CAM_EDM_DRO] Extending the length of ball screw
turbulatordude
2006-10-23 09:42:41 UTC
Re: Extending the length of ball screw
JanRwl@A...
2006-10-23 15:01:05 UTC
Re: [CAD_CAM_EDM_DRO] Extending the length of ball screw
Terry Owens
2006-10-23 17:03:38 UTC
Re: [CAD_CAM_EDM_DRO] Extending the length of ball screw
Horace, T.L.Ho
2006-10-24 05:03:04 UTC
Re: Extending the length of ball screw
Horace, T.L.Ho
2006-10-24 05:03:46 UTC
Re: Extending the length of ball screw
Horace, T.L.Ho
2006-10-24 05:13:55 UTC
Re: Extending the length of ball screw
Horace, T.L.Ho
2006-10-24 05:14:55 UTC
Re: Extending the length of ball screw
WT
2006-10-24 06:42:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Extending the length of ball screw
Horace, T.L.Ho
2006-10-25 04:34:52 UTC
Re: Extending the length of ball screw
WT
2006-10-25 05:18:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Extending the length of ball screw
Horace, T.L.Ho
2006-10-28 08:11:50 UTC
Re: Extending the length of ball screw
WT
2006-10-31 16:51:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Extending the length of ball screw
Horace, T.L.Ho
2006-10-31 20:38:33 UTC
Re: Extending the length of ball screw
WT
2006-11-01 02:20:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Extending the length of ball screw