Re: 3d CAD drawing " Pikachu "

There was a webpage that sells a 3d scanner and in that page, there
was sample scans, wich included a sculpture, I think it was the Venus
de milo, and a Pikachu model too. Cant remember what scanner was thoug.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dan Mauch" <dmauch@...> wrote:
>
> I would think the easiest was to do this would be to make a clay
model. Then
> 3d scan it.
> Dan Mauch
> low cost stepper and servo motors.
> cases for Gecko drives
> kits and assembled 3-4 axis drives
> www.camtronics-cnc.com
> www.seanet.com/~dmauch
> ----- Original Message -----
> From: "turbulatordude" <dave_mucha@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, January 29, 2007 7:27 AM
> Subject: [CAD_CAM_EDM_DRO] Re: 3d CAD drawing " Pikachu "
>
>
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "shadi_salhab_78" <salhab@>
> > wrote:
> >>
> >>
> >> Dave,
> >> I'm trying to cut a cavity for a blow mold , it seems that a 3d
scaner
> >> would solve it , but I don't have one!
> >>
> >> Shadi
> >
> >
> > I have seen software that would take a picture, then digitize it, then
> > set depths of cut based on some value, dark color or some such. then
> > pass that on to G-Code so the unit can be cut as a relief.
> >
> > I would have thought someone one here would know or use such software.
> >
> > I'm pretty sure it is available.
> >
> > I'll ask a friend who does use stuff like that.
> >
> > Dave
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it
> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to
be a
> > sister site to the CCED group, as many of the same members are
there, for
> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>