Re: Z Axis Conversion
Posted by
Mike Phillips
on 2007-02-15 13:04:56 UTC
Jon,
I have had your site bookmarked for years. It's definitely the kind of
design I like.
Mike
I have had your site bookmarked for years. It's definitely the kind of
design I like.
Mike
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@...> wrote:
>
> Mike Phillips wrote:
>
> >I'd sure appreciate any pointers to retrofitting a Ballscrew to the Z
> >axis on my Bridgeport head. I found a couple in CNCZone, but that's
> >about it.
> >
> >
> Here are some pictures and description on how I did it.
> http://jelinux.pico-systems.com/zaxis.html
>
> It turned out to be a bit of a kluge due to the difficulty of
accurately
> measuring
> something as round and lumpy as the Bridgeport head. It leaves the head
> mounting bolts alone, so you don't mess up the alignment when you
tilt or
> tram the head.
>
> Jon
>
Discussion Thread
Mike Phillips
2007-02-14 19:00:45 UTC
Z Axis Conversion
Polaraligned
2007-02-15 04:04:32 UTC
Re: Z Axis Conversion
Jon Elson
2007-02-15 10:35:35 UTC
Re: [CAD_CAM_EDM_DRO] Z Axis Conversion
Mike Phillips
2007-02-15 13:04:56 UTC
Re: Z Axis Conversion
Mike Phillips
2007-02-15 13:13:46 UTC
Re: Z Axis Conversion
Jon Elson
2007-02-15 13:45:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z Axis Conversion
Mike Phillips
2007-02-15 15:31:21 UTC
Re: Z Axis Conversion
Jon Elson
2007-02-15 21:49:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z Axis Conversion
Mike Phillips
2007-02-15 23:05:55 UTC
Re: Z Axis Conversion
Jon Elson
2007-02-16 10:14:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z Axis Conversion