Re: [CAD_CAM_EDM_DRO] 10 TPI Ballscrew

You should be able to order a replacement leadscrew from the manufacture. I
was experimenting with reducing the backlash in the quill of a mill drill. I
found the enco parts fit my md just fine
Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch

----- Original Message -----
From: "qwerty5847" <qwerty5847@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, February 16, 2007 9:29 AM
Subject: [CAD_CAM_EDM_DRO] 10 TPI Ballscrew


>I would like to add steppers to my mill/drill for occasional use and
> still use it manually. The 10 TPI lead screws are worn and need to be
> replaced but it seems 10 TPI ballscrews are not easy to find and I
> would think 5 TPI would be too course for manual use. Any suggestions
> would be much appreciated.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>