Re: 5 wire color codes ?

>
> Phasing can be tricky, but you now have the centertap and know where
> the ends of the star are. NEVER CHANGE HOOKUPS UNDER POWER! Your
> driver will go away.
>
> Hooking the centertap to +<small voltage like 3.3V> ground one wire,
> now a second and see what the shaft does. If it doesn't move, you
> have two ends of one coil. If it does, you now have two coil
> ends.
>

I just got back to this motor. a 1.5v battery on the common will
cause a step if any other wire is connected.

it appears that some combinations will move more than others.

By chance I was able to move the motor so each wire in turn would have
the motor step all in the same direction.

I assume that if I can have 4 steps, each moving the motor in the same
direction, that the wire sequence is correct ?

Dave