Re: [CAD_CAM_EDM_DRO] Re: BT30 drawbar

> These fingers were high tensile and hardened steel. Their general
> shape was/is
> ___
> _____/ \

if you scroll almost all the way down to the bottom of this page:
http://www.diy600.net/
there is a drawing for a ISO30 DIY spindle that a fellow finn cnc'er is
building. it shows the draw-bar, the gripper, the springs that push the
draw-bar up(it's pushed transiently down for toolchanges by a pneumatic
cylinder), etc.


AW