CAD CAM EDM DRO - Yahoo Group Archive

Re: 3D printer fun with powder

on 2007-06-21 10:08:56 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "afogassa" <afogassa@...> wrote:
>
> Graham, I've the zcorp user's manual, and there is drawing of the
> gantry on it, it shows a spreder roller, a snow plow at the sides of
> it and what looks like a blade to scrape the powder back to the
> front of the roller.this way the powder won't roll on the roller
> itself.
> It's not very clear, looks like a hand made drawing.
> there is also a suction cup on the printer head bay.
> I'll try a 20mm anodized aluminum tube and the blade, but first I
> have to build a plataform for the printer and the feeding bin
> mechanism, so the spreader roller will be last one.
>


Any chance of a copy?

I tried a blade to scrape the roller last night, it is rubber and
normally used for grouting tiles. I'll try it again with the bigger
roller (now installed but I'm going out). I'll also try some mylar as
per Jon's suggestion.

I'm wondering if I should increase roller speed to stop the creation
of the sausages by basically putting more energy into the powder to
whip it up, could get dusty.

Graham

Discussion Thread

Graham Stabler 2007-06-17 16:23:13 UTC 3D printer fun with powder David G. LeVine 2007-06-17 23:59:59 UTC Re: [CAD_CAM_EDM_DRO] 3D printer fun with powder Graham Stabler 2007-06-18 01:49:36 UTC Re: 3D printer fun with powder afogassa 2007-06-18 08:03:51 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-18 08:43:22 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-18 16:15:25 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-21 01:47:12 UTC Re: 3D printer fun with powder al5502 2007-06-21 07:48:36 UTC Re: 3D printer fun with powder David G. LeVine 2007-06-21 07:55:46 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Alan KM6VV 2007-06-21 08:12:35 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Jon Elson 2007-06-21 09:29:48 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder afogassa 2007-06-21 09:45:56 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-21 09:50:39 UTC Re: 3D printer fun with powder NEVILLE WEBSTER 2007-06-21 10:07:00 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Graham Stabler 2007-06-21 10:08:56 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-21 10:10:05 UTC Re: 3D printer fun with powder NEVILLE WEBSTER 2007-06-21 10:20:09 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Graham Stabler 2007-06-21 15:55:49 UTC Re: 3D printer fun with powder Jon Elson 2007-06-21 21:35:49 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder David G. LeVine 2007-06-21 21:42:11 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Mark Vaughan 2007-06-22 00:23:19 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Graham Stabler 2007-06-22 06:22:03 UTC Re: 3D printer fun with powder al5502 2007-06-22 09:19:42 UTC Re: 3D printer fun with powder Jon Elson 2007-06-22 09:47:27 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder afogassa 2007-06-22 10:14:38 UTC Re: 3D printer fun with powder Mark Vaughan 2007-06-22 12:30:01 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Graham Stabler 2007-06-22 15:58:17 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-22 16:07:34 UTC Re: 3D printer fun with powder Graham Stabler 2007-06-22 16:10:00 UTC Re: 3D printer fun with powder Mark Vaughan 2007-06-23 01:30:42 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Graham Stabler 2007-06-23 02:17:36 UTC Re: 3D printer fun with powder Mark Vaughan 2007-06-23 08:51:51 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder th.carel 2007-06-26 06:24:39 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D printer fun with powder Graham Stabler 2007-06-26 07:08:12 UTC Re: 3D printer fun with powder