CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Cables

on 2007-09-02 17:17:36 UTC
At 01:46 AM 9/2/2007, you wrote:
>A bit pricey (cable end is $12, chassis end is $8 for eight connections) but
>they are bulletproof, specifically designed for high-current applications
>and about as indestructible as you can get. Twist-lock so they will not come
>loose.

You might want to check out
http://www.mouser.com/search/ProductDetail.aspx?R=NL4MPvirtualkey56810000virtualkey568-NL4MP
as the chassis mount connector is under $3 there...

But they are not cheap at all! Of course if you want prime oats,
those are expensive, once processed through a horse, the product gets
less expensive.


David G. LeVine
Nashua, NH 03060

Discussion Thread

ronald_41 2007-09-01 00:48:17 UTC Cables ronald_41 2007-09-01 00:48:39 UTC Cables Archie 2007-09-01 08:10:57 UTC Re: [CAD_CAM_EDM_DRO] Cables Michael Fagan 2007-09-01 15:07:38 UTC Re: [CAD_CAM_EDM_DRO] Cables ronald_41 2007-09-01 17:48:25 UTC Re: Cables Michael Fagan 2007-09-01 18:06:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Cables Dave Halliday 2007-09-01 22:50:20 UTC RE: [CAD_CAM_EDM_DRO] Cables David G. LeVine 2007-09-02 17:17:36 UTC RE: [CAD_CAM_EDM_DRO] Cables David G. LeVine 2007-09-02 17:20:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Cables