Re: [CAD_CAM_EDM_DRO] OT, Any dynascope users out there?

Hi Graham,

Never ceases to amaze me, the gadgets you pick up. I imagine you as some
sort of mad scientist. For myself I bought a regular 20X/40X stereo
microscope on ebay for $125. Apparently they're fairly common among coin
collectors. But I don't use it enough to have complaints about the
discomfort. I bought it because since I turned 45 I can't focus my eyes as
tightly any more, and some times need to see things up close. Never even
heard of a dynascope before this.
--
Phil Mattison

----- Original Message -----
From: Graham Stabler <grezmos@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, September 03, 2007 1:20 AM
Subject: [CAD_CAM_EDM_DRO] OT, Any dynascope users out there?


>
> I've got a vision engineering dynascope TS-2 stereo viewer just like
> this one more or less:
>
> http://www.test-hire.co.uk/Vision_ts-3_stereo_dynascope_ts3.htm
>
> It projects the image of both objectives to a rotating lenticular disk
> giving a stereoscopic view on the screen, it works really well. It
> also has a 45 degree viewer which allows you to look at an object from
> 45 degrees and then orbit it which is very useful.
>
> I'd really like to add a camera to it, there is a plate on the side
> that can be removed and a mirror that slides in place deflecting the
> light from one objective out of the port, I've seen pictures with
> something connected to this port but I can't decide if it is to allow
> a camera to be attached or to let you project on to a bigger screen or
> something.
>
> I thought someone in the group might know something. Please email me
> direct to grezmos hat googlemail not com
>
> Graham
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>