RE: [CAD_CAM_EDM_DRO] HD PWM DC speed controller

Thanks, We have a 2005 version of the edubot controller (just before they
went to VEX), so it needs an RC control. IFI says hooking the VEX
controller to the edubot isn't trivial, so am wondering about it. If I
could find a way to hard wire it, that might be a solution, then just get
some more Victors, eh?

What if I took apart a joystick and wired it (X and Y at least into the
analog inputs of the edubot controller? Then reprogram it to look at the X
and Y inputs and output to the 884's speed and direction? Probably a little
above me right now, but I could probably learn how to do this.

Thanks, Chuck.

>FYI-Victor 884's are PWM controllers. What you want is to find a team

who's got one of the really old IFI mini-RC's. They can run stand-alone and
don't need an OI, radios, etc to run. We use one to control a
small-go-kart we built this year. IFI gave them to teams until the late
1990's or so, in two versions. One has an integral radio, the other one was
designed to be used with an RC Car radio. Look for something about the size
of a pack of playing cards. They work great.
Michael

On 9/10/07, ebiz_59 <chuckm@...> wrote:
>>
>> I work with high school kids building robots. Most of the time, we
>> are us IFI Robotics controllers and Victor 884’s -
>> http://www.ifirobotics.com/rc.shtml to supply power to the motors.
>> However, we are now trying to make a unit that we ride, so we are
> interested in replacing the whole remote control system with two PWM
> motor speed controllers. We currently have two choices for ground
> drive motors and their specs are thus: 12 vdc, 270 - 340 ish peak
> watts, stall torque 350 â€" 570 oz-in, stall amps 96 â€" 133, no load
> running amps 1 â€" 2.7 amps, no load rpm 2700 to 5300. I've looked some
> for PWM controllers, but don't seem to find ones big enough. Any help
> would be appreciated. thanks, Chuck
>
>
>