CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Correction...Control box for Gecko's

on 2007-09-29 07:09:29 UTC
Bill,

Our new breakout board has a 26 pin connector to support the Xylotex drives.
This gives you all the breakout board support functions. The board then
passes the step and direction signals through a ribbon cable to the Xylotex
driver.

I can mount the Xylotex driver in my enclosure.

Robert Colin Campbell
Bob Campbell Designs
www.Campbelldesigns.net
Mach 2/3 breakout boards
Relay boards
Spindle Speed boards
Stepper motors
Plasma Torch Height control

----- Original Message -----
From: <wanliker@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, September 28, 2007 11:45 PM
Subject: [CAD_CAM_EDM_DRO] Correction...Control box for Gecko's


> Correction,
> I have egg on my face, I meant Xylotex, not Geckos for this project.
> bill
>
> <<
>
>
> Who is making, and selling control boxes for mounting Gecko 320's
>
>
> (3 or 4), I have lost a bunch of my favorite places where they were
> listed.Pre
>
> punched for mounts, and control switches, outputs?
>
> Schematic?
>
> Thank You,
> bill
>
>
> *
> *
> *
> I have egg on my face, I meant Xylotek, not Geckos for this project.
> bill
>
>
>
> ************************************** See what's new at
> http://www.aol.com
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>

Discussion Thread

wanliker@a... 2007-09-28 21:45:44 UTC Correction...Control box for Gecko's Robert Colin Campbell 2007-09-29 07:09:29 UTC Re: [CAD_CAM_EDM_DRO] Correction...Control box for Gecko's caudlet 2007-09-29 08:20:51 UTC Re: Correction...Control box for Gecko's