Re: [CAD_CAM_EDM_DRO] Hiya. New to thread.

Well, another making chips! glad to hear it. most of us here started much
the same way........and once hooked it is a never ending task to get larger,
bigger, faster, and more.......happy holidays, brian f.


www.genapro.com

----- Original Message -----
From: "stan" <stan.distortion@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, December 22, 2007 1:48 PM
Subject: Re: [CAD_CAM_EDM_DRO] Hiya. New to thread.


> Yeehaw!! :) My made-from-bits-of-cheap-kitchen miller made its first cuts
> today :)
> Only on a simple script controlled over an i2c bus and only on MDF
> (canibalism ?) but they where cuts goddamnit.
> Conclusion? Must write software...must write software...must write
> software...and... dremels are no use whatsoever on homemade millers. Going
to
> have to support the collet nut in a bearing if it is ever going to be
usable,
> will be looking at other options first though.
> Considering the state of the tool I was using the thing should be rigid
enough
> for brass and aluminium and should manage 0.5mm pitch PCB tracks without
any
> problems once the spindle is sorted out.
> Right...G01....
> cheers
>