Re: [CAD_CAM_EDM_DRO] Re: not working!

In a message dated 8/3/00 10:12:09 PM Central Daylight Time,
bobach@... writes:

<< Use any pin # 18 thru 25 on the parallel port for signal ground. >>

Like I said to Mr.C, often, only ONE of those 8 pins are actually
connected across from one connector to the other! Best, TEST each for
continuity, first! If not molded in a gob of plastic, solder a jumper among
all-8, so any-one is true-ground!