Re: [CAD_CAM_EDM_DRO] Brushless Servo Motor Drivers
Posted by
gcode fi (hanermo)
on 2009-01-01 00:33:27 UTC
Is this 20 A x 120 V = 2.4 Kw ?
Sounds like just the ticket for my lathe.
I will see how it goes with my trials, and may order one from You if the
treadmill ones donĀ“t do it.
Any re: on a motor?
I am aiming for best bang/buck, as near max power as possible, for a
decent price.
Original motor is AC 1.5 kW, so something around this, or a bit more.
Should it be ok on a 10k us digital encoder ?
Jon Elson wrote:
Sounds like just the ticket for my lathe.
I will see how it goes with my trials, and may order one from You if the
treadmill ones donĀ“t do it.
Any re: on a motor?
I am aiming for best bang/buck, as near max power as possible, for a
decent price.
Original motor is AC 1.5 kW, so something around this, or a bit more.
Should it be ok on a 10k us digital encoder ?
Jon Elson wrote:
>
> garageboy21 wrote:
> > Hi all, Happy New Year!
> >
> > I have a Gorton 1-22 vertical mill (a bridgeport-style mill) that I
> > have been running turbo CNC on for years. I have 2 NEMA42 steppers on
> > X and Y and a huge brushed DC servo driving the knee (not the quill),
> > all running Gecko Drives.
> >
> > The feeds are limited to about 70ipm on X and Y with the steppers and
> > I was thinking about switching to servos, but wanted to do brushless.
> > Does anyone know of a place to get Gecko-like step and direction
> > drives for brushless motors?
> >
> > I have looked all over, and it looks like I would be spending ~$500 an
> > axis minimum just on the drive.
> >
> >
> I sell a complete brushless drive for up to 20 A and 120+ V for $150.
>
> Jon
>
> __
Discussion Thread
garageboy21
2008-12-31 11:53:20 UTC
Brushless Servo Motor Drivers
Gary Corlew
2008-12-31 16:32:55 UTC
Re: Brushless Servo Motor Drivers
Jon Elson
2008-12-31 20:07:30 UTC
Re: [CAD_CAM_EDM_DRO] Brushless Servo Motor Drivers
gcode fi (hanermo)
2009-01-01 00:33:27 UTC
Re: [CAD_CAM_EDM_DRO] Brushless Servo Motor Drivers
timgoldstein
2009-01-01 08:18:21 UTC
Re: Brushless Servo Motor Drivers
Henrik Olsson
2009-01-01 09:56:27 UTC
Re: [CAD_CAM_EDM_DRO] Brushless Servo Motor Drivers
David Bloomfield
2009-01-01 10:04:09 UTC
Re: Brushless Servo Motor Drivers
Jon Elson
2009-01-01 10:20:52 UTC
Re: [CAD_CAM_EDM_DRO] Brushless Servo Motor Drivers
Jon Elson
2009-01-01 10:26:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless Servo Motor Drivers
Jim Fleig - CNC Services
2009-01-01 14:23:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless Servo Motor Drivers
Jon Elson
2009-01-02 20:32:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless Servo Motor Drivers
Jon Elson
2009-01-02 21:29:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brushless Servo Motor Drivers