Re: [CAD_CAM_EDM_DRO] Mach3 /Rhinocam problem

Steve,
 
Thanks for your reply!   I'm feeling kind of stupid right now!
 
Below is the code.  I edited the post processor as per instructions from people on Mecsoft and Mach 3 forums.  I have to be doing something wrong!  Every time it goes into the G81 it sets off the abnormal light.  Motion mode in the Gen Config is set to CV.
 
 
G00 G49 G40.1 G17 G80 G50 G90G64
G20
(Standard Drill )
M6 T1
M03 S4583
G00 Z0.1250
X2.0000 Y0.2810
G81 X2.0000 Y0.2810 Z-0.6722 R0.1
G80
G00 Z0.1250
G81 X0.5000 Y0.2810 Z-0.6722 R0.1
G80
G00 Z0.1250
(2 1/2 Axis Pocketing)
M6 T2
M03 S4583
X1.2737 Y0.7375
G01 Z0.0292  F10.0
Z0.0042  F6.0
X1.2723 Y0.7383 Z0.0039  F4.0
X1.2656 Y0.7407 Z0.0026
X1.2588 Y0.7423 Z0.0014
X1.2518 Y0.7430 Z0.0001
X1.2447 Y0.7427 Z-0.0011






[Non-text portions of this message have been removed]