RE: [CAD_CAM_EDM_DRO] Tab/Tag Software
Posted by
Andy Wander
on 2010-11-09 12:09:39 UTC
I believe Sheetcam does tabs, and it is pretty inexpensive as far as CAM programs go.
Andy Wander
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Neil Gillies
Sent: Tuesday, November 09, 2010 3:04 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Tab/Tag Software
Hi All
Does anyone know of any tabbing/tagging software that will automatically apply tabs to a 2D cut to stop the cut items from falling from the panel?
It could be applied at any stage really - either at the CAD stage - perhaps on the dxf file or at the gcode stage.
All of my stuff in this instace will be 2D panel work, but the system can handle 3d - perhaps on the last pass of a multipass cut, it could leave tabs (maybe just stack the 2D cuts - 2.5D really).
I've had a look at Vectrics 2dCut which looks OK and can handle the job, but a bit over the top for what I need as I already have DeskCNC which does everything (apart from tab cutting that is :-)))
TIA
Neil
------------------------------------
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex
Andy Wander
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Neil Gillies
Sent: Tuesday, November 09, 2010 3:04 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Tab/Tag Software
Hi All
Does anyone know of any tabbing/tagging software that will automatically apply tabs to a 2D cut to stop the cut items from falling from the panel?
It could be applied at any stage really - either at the CAD stage - perhaps on the dxf file or at the gcode stage.
All of my stuff in this instace will be 2D panel work, but the system can handle 3d - perhaps on the last pass of a multipass cut, it could leave tabs (maybe just stack the 2D cuts - 2.5D really).
I've had a look at Vectrics 2dCut which looks OK and can handle the job, but a bit over the top for what I need as I already have DeskCNC which does everything (apart from tab cutting that is :-)))
TIA
Neil
------------------------------------
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex
Discussion Thread
Neil Gillies
2010-11-09 12:04:50 UTC
Tab/Tag Software
Andy Wander
2010-11-09 12:09:39 UTC
RE: [CAD_CAM_EDM_DRO] Tab/Tag Software
PK
2010-11-09 13:59:40 UTC
Re: [CAD_CAM_EDM_DRO] Tab/Tag Software
caudlet
2010-11-09 14:03:55 UTC
Re: Tab/Tag Software
Jeffrey T. Birt
2010-11-10 23:35:18 UTC
RE: [CAD_CAM_EDM_DRO] Tab/Tag Software
Jim Fleig CNC Services
2010-11-11 13:19:00 UTC
RE: [CAD_CAM_EDM_DRO] Tab/Tag Software
birt_j@s...
2010-11-11 13:59:35 UTC
RE: [CAD_CAM_EDM_DRO] Tab/Tag Software