Re: Tab/Tag Software

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Andy Wander <awander@...> wrote:

>
> I believe Sheetcam does tabs, and it is pretty inexpensive as far as CAM programs go.
>
>
> Andy Wander
>
>
>

YEP! You just select the Tabs arrow and click on the locations on the toolpath. You then can specify the width and depth of the tab. You can make it lift completely out of the cut or have it lift up partially so the tab is thinner. never tried it with plasma cutting but it works great for routing out parts that would fall out or catch on the tool as they come loose.

www.SheetCAM.com

TOM caudle
www.CandCNC.com