Re: PMDX-122 with which THC
Posted by
Tom
on 2011-11-21 16:52:21 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "bob campbell" <bob@...> wrote:
Been the same since day one (THC300 days)! Gotta have: UP, DOWN and Arc OK. Most single port BoB cards have 5 inputs. One is for e-stop and 4 are for all other inputs. If you want homes and limits then there is not enough for the three more for the THC.
The PMDX 122 card has opto isolated inputs (the standard 5).
The PMDX 126 card has 8 opto isolated inputs (muxed) The ONLY other BoB that has more than 5 inputs (9) from a single parallel port, is our UBOB III card (that is also in the MP3000-DTHCII.
The customer wants a way to use his PMDX 122 card but the fact remains that he STILL NEEDS 3 inputs dedicated to the THC functions in MACH.
Tom caudle
www.Candcnc.com
>And, what Randy will tell him is, he needs 3 dedicated inputs for MACH.
> Rick,
>
> I will have Randy Ray contact you. Randy has what you need. Randy took over
> the THC business from Jim Cullins. Randy also has some new offerings.
>
> Bob Campbell
>
Been the same since day one (THC300 days)! Gotta have: UP, DOWN and Arc OK. Most single port BoB cards have 5 inputs. One is for e-stop and 4 are for all other inputs. If you want homes and limits then there is not enough for the three more for the THC.
The PMDX 122 card has opto isolated inputs (the standard 5).
The PMDX 126 card has 8 opto isolated inputs (muxed) The ONLY other BoB that has more than 5 inputs (9) from a single parallel port, is our UBOB III card (that is also in the MP3000-DTHCII.
The customer wants a way to use his PMDX 122 card but the fact remains that he STILL NEEDS 3 inputs dedicated to the THC functions in MACH.
Tom caudle
www.Candcnc.com
Discussion Thread
richybocaz
2011-11-21 11:05:15 UTC
PMDX-122 with which THC
bob campbell
2011-11-21 16:33:11 UTC
RE: [CAD_CAM_EDM_DRO] PMDX-122 with which THC
Tom
2011-11-21 16:52:21 UTC
Re: PMDX-122 with which THC
morerust
2011-11-21 17:20:21 UTC
Re: PMDX-122 with which THC
Ricardo Bocaz Bocaz
2011-11-21 18:39:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: PMDX-122 with which THC
bob campbell
2011-11-22 07:10:34 UTC
RE: [CAD_CAM_EDM_DRO] Re: PMDX-122 with which THC