Solder Robot conversion to Mach3 and ESS finally finished! (almost)

Hi all,

Over the weekend I finally  managed to complete the conversion of my
Soldering Robot to Mach3 and the Ethernet SmoothStepper. I was able to do
some test soldering that turned out very well.

In the G-Code I'm using the G82 drill with dwell command. That way I can
just list all the X,Y points fo be soldered. The Macropump in Mach3
detects the dwell and starts the solder cycle. When the cycle ends, the
macropump cancels the dwell and the G82 moves to the next location.

The full write up with pictures can be found here.

http://www.homanndesigns.com/index.php?option=com_content&view=category&id=34:cnc-projects&Itemid=55&layout=default

 

Cheers,

 

Peter
---------------------------
Peter Homann
http://www.homanndesigns.com/store

-------------------------
Message sent via Atmail Open - http://atmail.org/

[Non-text portions of this message have been removed]