RE: [CAD_CAM_EDM_DRO] Solder Robot conversion to Mach3 and ESS finally finished! (almost)

Peter:



Did you record any footage of the machine working? I'd love to see that.



Andy Wander

_____

From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Peter
Sent: Wednesday, February 27, 2013 9:05 PM
To: mach1mach2cnc@yahoogroups.com; DIY-CNC@yahoogroups.com;
CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Solder Robot conversion to Mach3 and ESS finally
finished! (almost)







Hi all,

Over the weekend I finally managed to complete the conversion of my
Soldering Robot to Mach3 and the Ethernet SmoothStepper. I was able to do
some test soldering that turned out very well.

In the G-Code I'm using the G82 drill with dwell command. That way I can
just list all the X,Y points fo be soldered. The Macropump in Mach3
detects the dwell and starts the solder cycle. When the cycle ends, the
macropump cancels the dwell and the G82 moves to the next location.

The full write up with pictures can be found here.

http://www.homanndesigns.com/index.php?option=com_content
<http://www.homanndesigns.com/index.php?option=com_content&view=category&id=
34:cnc-projects&Itemid=55&layout=default>
&view=category&id=34:cnc-projects&Itemid=55&layout=default



Cheers,



Peter
---------------------------
Peter Homann
http://www.homanndesigns.com/store

-------------------------
Message sent via Atmail Open - http://atmail.org/

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]