CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Motorising a rotary table

on 2013-06-28 07:34:05 UTC
Michael

I'll try again, the last message I sent seems to have got lost.


To see how I did it on a 150mm table, see:
<http://www.youtube.com/watch?v=sIAeic1DEoc>
You can find the CNCzone thread at:
<http://www.cnczone.com/forums/open_source_controller_boards/47007-rotary_table_indexer.html>
Using it in programme mode, see:
<http://www.youtube.com/watch?v=9aVWsQYkvzc>

Malcolm

I don't suffer from insanity I enjoy it!

Mene, mene, tekel, upharsin

The writing is on the wall.

--- On Tue, 6/25/13, michael_s@... <roblineng@...> wrote:

From: michael_s@... <roblineng@...>
Subject: [CAD_CAM_EDM_DRO] Motorising a rotary table
To: CAD_CAM_EDM_DRO@yahoogroups.com
Date: Tuesday, June 25, 2013, 11:08 PM

I have a 400mm rotary table that I wish to mechanise and understand that I need to fit a servo motor to it. I would propose to mount the motor to the input shaft after removing the handwheel .

Doing the mechanical is not a problem for me and even the wiring if I know what to do.  Please can anyone help me with information of what I need to buy and how to wire things up.  The handwheel to table ratio is 40:1 and I need to be able to control the table rotation from zero to 5 rpm.

I envisage controlling the motor either from a switch or a foot pedal.  It would be handy if the motor could cause the table to rotate once and then stop but this isn't vital.


Many thanks for any help that may be given.

Mike



------------------------------------

Addresses:   
FAQ:  http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe:  CAD_CAM_EDM_DRO-subscribe@yahoogroups.com 
Unsubscribe:  CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com 
List owner:  CAD_CAM_EDM_DRO-owner@yahoogroups.comwanliker@..., timg@...
Moderator:  pentam@... indigo_red@... davemucha@...  [Moderators] 
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS:  General Machining
If you wish to post on unlimited OT subjects goto:   aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop%c2%a0%c2%a0%c2%a0I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.  DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner

Yahoo! Groups Links





[Non-text portions of this message have been removed]

Discussion Thread

michael_s@y... 2013-06-27 14:22:42 UTC Motorising a rotary table Ralph Reese 2013-06-27 15:43:44 UTC RE: [CAD_CAM_EDM_DRO] Motorising a rotary table Dave Halliday 2013-06-27 21:39:03 UTC RE: [CAD_CAM_EDM_DRO] Motorising a rotary table Randall Wink 2013-06-28 05:10:25 UTC RE: [CAD_CAM_EDM_DRO] Motorising a rotary table Randy 2013-06-28 06:15:47 UTC RE: [CAD_CAM_EDM_DRO] Motorising a rotary table Malcolm Parker-Lisberg 2013-06-28 07:34:05 UTC Re: [CAD_CAM_EDM_DRO] Motorising a rotary table John Dammeyer 2013-06-28 08:09:07 UTC RE: [CAD_CAM_EDM_DRO] Motorising a rotary table John Dammeyer 2013-06-28 09:09:19 UTC RE: [CAD_CAM_EDM_DRO] Motorising a rotary table David G. LeVine 2013-06-28 13:05:03 UTC Re: [CAD_CAM_EDM_DRO] Motorising a rotary table Andy M 2013-06-29 12:08:02 UTC Re: [CAD_CAM_EDM_DRO] Motorising a rotary table Malcolm Parker-Lisberg 2013-07-06 11:45:38 UTC Re: [CAD_CAM_EDM_DRO] Motorising a rotary table