Re: Graduating from CNC to robotics
Posted by
AlienRelics
on 2013-09-16 05:35:03 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude" <dave_mucha@...> wrote:
http://www.shapeoko.com/wiki/index.php/Grbl
Someone is even working on a shield for it:
http://blog.protoneer.co.nz/arduino-cnc-shield/
I am not the proper person to evaluate GRBL. It is what is running a lot of those ShapeOKOs and variants.
http://zapmaker.org/projects/grbl-controller-3-0/
Steve Greenfield AE7HD
> If that does not fly, I would offer that the Arduino is a great starter microprocessor. Easy to use, has a huge array of chips you can use and although it is too slow for CNC work it has a lot of functions.Actually, there is GRBL, an open source G-Code interpreter for the Arduino.
>
http://www.shapeoko.com/wiki/index.php/Grbl
Someone is even working on a shield for it:
http://blog.protoneer.co.nz/arduino-cnc-shield/
I am not the proper person to evaluate GRBL. It is what is running a lot of those ShapeOKOs and variants.
http://zapmaker.org/projects/grbl-controller-3-0/
Steve Greenfield AE7HD
Discussion Thread
Peter
2013-08-03 12:33:51 UTC
Graduating from CNC to robotics
turbulatordude
2013-08-20 09:07:24 UTC
Re: Graduating from CNC to robotics
AlienRelics
2013-09-16 05:35:03 UTC
Re: Graduating from CNC to robotics
John Dammeyer
2013-09-16 09:05:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Graduating from CNC to robotics
Jon Elson
2013-09-16 09:28:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Graduating from CNC to robotics