CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine

on 2014-05-15 13:38:24 UTC
If you check out the Digi-Key part I referenced, you will see the challenge to punch this part. Tooling would be expensive also. So, where do I look for a laser solution. I see on ebay there is x-y tables for less than 500 bucks. I would have to add a z axis. After the table is complete, can you give me a list of components I will need to source in order to complete an entire machine with controls?

Thanks,

 
Denis Knobloch
Kam Inc.
ph. 712-473-2400


From: "'Tony Smith' ajsmith1968@... [CAD_CAM_EDM_DRO]" <CAD_CAM_EDM_DRO@yahoogroups.com>
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Thursday, May 15, 2014 2:38 PM
Subject: RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine

 
In theory 100W C02 would do it, here: http://www.youtube.com/watch?v=PH4MIlFSn_U is a 150W one cutting 2mm. That’s using oxygen to do the actually cut though.

That sort of power is within reach to the adventurous hobbyist, a 150 tube costs around $2,000.

I’d sticking to punching unless someone does laser cutting in your area.

Tony

Tony,

I am curious, what size laser would I need to cut 20 gauge painted steel, Digi-Key item # HM306-ND? I need to cut vent holes in this box.

Denis Knobloch
Kam Inc.
ph. 712-473-2400

_____

Discussion Thread

2014-05-14 05:24:38 UTC FYI - A New Small Laser Machine Tony Smith 2014-05-14 05:32:03 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Vince Negrete 2014-05-14 06:43:43 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Tony Smith 2014-05-14 07:00:31 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Stan Stocker 2014-05-14 07:14:28 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Jon Elson 2014-05-14 08:12:58 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Tony Smith 2014-05-14 08:16:40 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine 2014-05-14 12:02:22 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine 2014-05-14 12:03:37 UTC Re: FYI - A New Small Laser Machine Tony Smith 2014-05-14 12:25:57 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine art2 2014-05-14 13:02:01 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Tony Smith 2014-05-14 15:08:22 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Denis Knobloch 2014-05-15 06:21:53 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Les Newell 2014-05-15 06:28:52 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Larry Edinger 2014-05-15 07:33:43 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Stan Stocker 2014-05-15 08:04:53 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Tony Smith 2014-05-15 12:38:29 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Tony Smith 2014-05-15 12:46:12 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Denis Knobloch 2014-05-15 13:38:24 UTC Re: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine Tony Smith 2014-05-15 14:02:05 UTC RE: [CAD_CAM_EDM_DRO] FYI - A New Small Laser Machine