Re: [CAD_CAM_EDM_DRO] G02 - G03
Posted by
Jon Anderson
on 2000-08-21 11:35:05 UTC
Art,
I used a Bosch control some years ago that used R, and I thought it
pretty easy to understand. Ahha uses I,K and it took me quite some time
to adapt. I suspect that using R requires a bit more in the software
since it must calculate the center. Not being a programmer, I'm just
guessing, but I suspect all circular moves are really treated
incrementally since curves are a long string of polar/rectangular
conversions, and you need the center of the radius to do that.
Jon
I used a Bosch control some years ago that used R, and I thought it
pretty easy to understand. Ahha uses I,K and it took me quite some time
to adapt. I suspect that using R requires a bit more in the software
since it must calculate the center. Not being a programmer, I'm just
guessing, but I suspect all circular moves are really treated
incrementally since curves are a long string of polar/rectangular
conversions, and you need the center of the radius to do that.
Jon
Discussion Thread
Tim Goldstein
2000-08-21 11:07:18 UTC
RE: [CAD_CAM_EDM_DRO] G02 - G03
Art Fenerty
2000-08-21 11:13:11 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
Art Fenerty
2000-08-21 11:15:40 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
Jon Anderson
2000-08-21 11:35:05 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
Jon Elson
2000-08-21 12:03:50 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
Darrell
2000-08-21 16:16:19 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
Darrell
2000-08-21 16:17:58 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
Art Fenerty
2000-08-21 17:17:07 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03
diazden
2000-08-22 17:41:45 UTC
Re: [CAD_CAM_EDM_DRO] G02 - G03