Re: [CAD_CAM_EDM_DRO] Milling HSS
Posted by
Jon Elson
on 2000-09-08 15:20:43 UTC
Paul Corner wrote:
the
HSS tool, although you can't do that to M42 and similar high cobalt
tools.
Grinding is a good way to shape these materials. I can't understand why
you can't grind it. That is the way these things are normally made.
Jon
> Hi AllI wouldn't use anything less than a carbide cutter. You need to anneal
>
> A friend - perhaps that should be spelt fiend - has asked if I can
> mill some
> cutting tips out of 5% cobolt HSS for a wood turning tool....
> Without resorting to EDM or grinding, I'm not sure whether this is
> worth
> trying. Has anyone on this list tried machining HSS, if so, what feed
> and
> speeds, cutter types etc....
> Loathed to trash an expensive cutter, hence I ask first.
the
HSS tool, although you can't do that to M42 and similar high cobalt
tools.
Grinding is a good way to shape these materials. I can't understand why
you can't grind it. That is the way these things are normally made.
Jon
Discussion Thread
Darrell
2000-09-08 14:09:02 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
James Owens
2000-09-08 14:34:17 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
dave engvall
2000-09-08 14:38:10 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
Darrell
2000-09-08 14:40:30 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
Jon Elson
2000-09-08 15:20:43 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
Paul Corner
2000-09-08 18:23:20 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
ptengin@a...
2000-09-09 13:06:46 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
Chris Paine
2000-09-12 14:42:03 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS
dave engvall
2000-09-13 20:01:28 UTC
Re: [CAD_CAM_EDM_DRO] Milling HSS