CAD CAM EDM DRO - Yahoo Group Archive

re: Need 1N4437 bridge rectifier...

Posted by tommy marantz
on 2000-09-12 17:45:16 UTC
Doug,

I really think you are OK with the new rectifier as long as its voltage
rating is high enough, like 400V for the 120 ac line.

I suspect your measurements are thrown off by either a bad diode in the old
bridge, or different meters used which will often give different readings on
the pulsed DC output of the rectifiers.

Tom

>Anyone know a source for this item? Mounts with a 1/4" bolt on the
>back. Metal case. At 110V ac input, ouput is 90V dc. Probably
>about 10 amp rating.
>
>Apparently this was widely used 20-30 years ago. My local sources
>don't even show the number in their listings.
>
>It's for the high/low clutch mechanism in a Hardinge DSMA.
>
>Lacking the exact part number I replaced it with one of those plastic
>cased rectifiers with 30A rating. Output is around 110V dc. Seems
>like the clutch actuating coils are running a little hot, although I
>can't say for sure since I never checked them until now.
>
>Anyway, it'd be nice to get the exact replacement part.
>
>Thanks,
>
>Doug
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

Share information about yourself, create your own public profile at
http://profiles.msn.com

Discussion Thread

dougrasmussen@c... 2000-09-12 16:09:32 UTC Need 1N4437 bridge rectifier... A. G. Eckstein 2000-09-12 16:45:40 UTC Re: [CAD_CAM_EDM_DRO] Need 1N4437 bridge rectifier... Alan Marconett KM6VV 2000-09-12 17:36:10 UTC Re: [CAD_CAM_EDM_DRO] Need 1N4437 bridge rectifier... tommy marantz 2000-09-12 17:45:16 UTC re: Need 1N4437 bridge rectifier... Stan Krumme 2000-09-12 17:55:13 UTC Re: Need 1N4437 bridge rectifier... JanRwl@A... 2000-09-12 20:03:55 UTC Re: [CAD_CAM_EDM_DRO] Need 1N4437 bridge rectifier... Darrell 2000-09-12 20:39:35 UTC Re: [CAD_CAM_EDM_DRO] Need 1N4437 bridge rectifier... ballendo@y... 2000-09-12 23:53:04 UTC Re: Need 1N4437 bridge rectifier... Jon Elson 2000-09-13 00:14:39 UTC Re: [CAD_CAM_EDM_DRO] Need 1N4437 bridge rectifier... ballendo@y... 2000-09-14 02:38:05 UTC Re: Re: Need 1N4437 bridge rectifier... dougrasmussen@c... 2000-09-14 06:54:23 UTC Re: Need 1N4437 bridge rectifier... Jeff Barlow 2000-09-14 10:42:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Need 1N4437 bridge rectifier...