Re: [CAD_CAM_EDM_DRO] New Book Needed

Bill,
I found the book you mentioned on Amazon, 100 bucks. I also found the the Electric Motors by V.J. Cox on the Amazon.UK website
for 5.50 (british lb)
I will try the Library for the Rosenburg book. Thanks!!

wanliker@... wrote:

> In a message dated 10/4/00 9:24:52 AM Mountain Daylight Time,
> jvicars@... writes:
>
> << Does such a book exist? I will pay!! >>
>
> Not the book you named but there is an excellent motor book, named:
> Electric Motor Repair, by Robert Rosenberg. Holt, Rinehart and Winston , Inc.
> ISBN 0-03-079090-5. Copywrite dates from 1946 to 1970, the later being the
> second edition. I have had my copy since the seventies and have found it to
> be very valuable on the pre stepper, servo, brushless motor designs.
> It will not contain anything about the newer motors, but contains extremely
> practical information about everything old, including things that have been
> obsolete for many many years. I would suggest interlibrary loan before its
> purchase, if you are interested in the new stuff.
> It is really two books in one ring bound, left book is the wiring, and
> winding information, right book is the text and study guide, common cover,
> between the two books.
> "A PRACTICAL BOOK ON THE WINDING, REPAIR, AND TROUBLESHOOTING OF A-C AND D-C
> MOTORS AND CONTROLLERS"
> your local rewinding shop might have a copy that you can take a glance at.
> bill
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager