Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Posted by
Jon Anderson
on 2000-10-09 12:33:39 UTC
catboat15@... wrote:
obscure fine scribe lines. You could do better with the pointed wiggler
and a loupe.
Jon
> Then have seen catalog drawings or photos of a device that is like aBeware the cheap ones. The cross hairs are so large as to totally
> periscope, Looks like a rod to fit your spindle and a telescope
> sticking out the side at about a 45 degree angle.
obscure fine scribe lines. You could do better with the pointed wiggler
and a loupe.
Jon
Discussion Thread
Joe Vicars
2000-10-09 06:42:05 UTC
Wigglers and Tricks
Joe Vicars
2000-10-09 06:49:57 UTC
Wigglers and Tricks
Darrell
2000-10-09 09:41:19 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Alan Marconett KM6VV
2000-10-09 11:29:21 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Carey L. Culpepper
2000-10-09 11:56:01 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Joe Vicars
2000-10-09 12:20:41 UTC
Wigglers and Tricks
catboat15@a...
2000-10-09 12:28:25 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Jon Anderson
2000-10-09 12:33:39 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Alan Marconett KM6VV
2000-10-09 13:07:31 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
James Owens
2000-10-09 13:16:45 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
wanliker@a...
2000-10-09 13:54:32 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Alan Marconett KM6VV
2000-10-09 15:16:28 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
James Owens
2000-10-09 17:10:34 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
ballendo@y...
2000-10-09 18:29:41 UTC
Re: Wigglers and Tricks
Alan Marconett KM6VV
2000-10-09 19:08:36 UTC
Re: Wigglers and Tricks
Bill Phillips
2000-10-10 14:08:18 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Alan Marconett KM6VV
2000-10-10 17:08:44 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
James Owens
2000-10-11 08:59:20 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks
Alan Marconett KM6VV
2000-10-11 10:59:57 UTC
Re: [CAD_CAM_EDM_DRO] Wigglers and Tricks