CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: making ball nuts

Posted by Ian Wright
on 2000-10-27 10:29:16 UTC
Sounds to me like this is a potential project for EDM - start with hardened
and tempered tube on a cnc powered horizontal rotary table. Set Z axis feed
to give thread pitch as table rotates and link an EDM circuit to the X-axis.
Then go and have a cup of tea (or two) while it does the business!!! ;o)

Ian
--
Ian W. Wright
Sheffield UK
----- Original Message -----
From: "Jon Anderson" <janders@...>
>
> Getting the proper shape on the tool is possible with care.
> However, consider that as your depth of cut increases, so will the
> length of cutting edge engaged in the cut. Unless you have a very
> massive boring bar and a rigid lathe, somewhere along the line you are
> almost certain to get some significant chatter. Ball bearings don't much
> care for running over washboard.
>
> > I don't think hardening would be a real problem.
>
> Hardening won't, avoiding distortion will.

Discussion Thread

jmw@c... 2000-10-26 14:26:29 UTC making ball nuts ballendo@y... 2000-10-26 14:59:30 UTC re:making ball nuts JanRwl@A... 2000-10-26 15:11:36 UTC Re: [CAD_CAM_EDM_DRO] re:making ball nuts Smoke 2000-10-26 15:31:15 UTC Re: [CAD_CAM_EDM_DRO] re:making ball nuts Jon Elson 2000-10-26 16:06:47 UTC Re: [CAD_CAM_EDM_DRO] making ball nuts ptengin@a... 2000-10-26 17:07:36 UTC Re: [CAD_CAM_EDM_DRO] making ball nuts Hugh Currin 2000-10-26 18:39:24 UTC Re: making ball nuts jmw@c... 2000-10-26 19:56:43 UTC Re: making ball nuts stratton@m... 2000-10-26 20:15:16 UTC Re: [CAD_CAM_EDM_DRO] Re: making ball nuts Anne Ogborn 2000-10-26 20:45:28 UTC Re: [CAD_CAM_EDM_DRO] Re: making ball nuts ballendo@y... 2000-10-26 21:01:52 UTC re:Re: making ball nuts Tim Goldstein 2000-10-26 21:06:17 UTC RE: [CAD_CAM_EDM_DRO] Re: making ball nuts Jon Anderson 2000-10-26 21:08:54 UTC Re: [CAD_CAM_EDM_DRO] Re: making ball nuts Smoke 2000-10-26 21:19:35 UTC Re: [CAD_CAM_EDM_DRO] Re: making ball nuts ballendo@y... 2000-10-26 21:22:16 UTC Re: Re: making ball nuts Smoke 2000-10-26 21:23:53 UTC Re: [CAD_CAM_EDM_DRO] Re: making ball nuts ballendo@y... 2000-10-26 21:43:43 UTC Re: Re: making ball nuts Terry Toddy 2000-10-27 05:55:22 UTC Re: [CAD_CAM_EDM_DRO] making ball nuts Clint Bach 2000-10-27 08:24:29 UTC Re: making ball nuts dougrasmussen@c... 2000-10-27 09:34:39 UTC Helical thread cutting........ was Re: making ball nuts Ian Wright 2000-10-27 10:29:16 UTC Re: [CAD_CAM_EDM_DRO] Re: making ball nuts