CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Cheap Encoders

Posted by Scott Acorn
on 1999-07-15 18:05:44 UTC
hi everyone,
my name is scott acorn i`m new to this so please bear with me.
i have been a tool maker for 40 yr.
the last 20 yr. i have had my own small shop.
i`m also a tinkering type,and have my hands into a lot of projects.
i`ve designed and bult a number of things that might be of interist to
all of you. thay include a e.d.m,and also a dro.
so-----now that i`ve blown my own horn--------
maybe i can answer some of your questions and provide some help.
i don`t always have time to respond rightaway but i will try.

Scott Acorn
sacorn@...
mike grady wrote:

> From: mike grady <mgrady@...>
>
> I have been thinking about doing this
> and using small prec, timing belts
> mike
> Matt Shaver wrote:
>
> > From: "Matt Shaver" <mshaver@...>
> >
> > > From: "Dan Mauch" <dmauch@...>
> > >
> > > Yes it has been done before. Steve Stallings had a good idea using a wire
> > > set up like a radio dial connected to a encoder. The mechanical part worked
> > > fine but there were problems finds a pc lpt card that would work well. The
> > > linear encoders are much simpler and more positve.
> >
> > I think this should be Steve Lindsay, see:
> >
> > http://www.angelfire.com/biz3/handengraving/dro.html
> >
> > I want to build this to see how well it works, especially whether the wire
> > will slip on the pulley when wet and oily. This, and the US Digital linear
> > strip, seem the only alternatives to commercial glass or capacitive scales
> > (Shooting Star's rack and pinion setup perhaps being a third).
> >
> > Matt
> >
> > P.S. I've met Steve Stallings at some meetings of the Chesapeake Area
> > Metalworking Society:
> >
> > http://www.cams-club.org
> >
> > He is a real nice guy and is the fellow responsible for the "Drop Box" at:
> >
> > http://www.metalworking.com
> >
> > --------------------------- ONElist Sponsor ----------------------------
> >
> > ONElist announces "FRIENDS & FAMILY!"
> > http://www.onelist.com
> > See homepage for details, including our weekly drawing!
> >
> > ------------------------------------------------------------------------
> > Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the discussion of shop built systems in the above catagories.
> > To Unsubscribe, read archives, change to or from digest.
> > Go to: http://www.onelist.com/isregistered.cgi
> > Log on, and you will go to Member Center, and you can make changes there.
> > bill,
> > List Manager
>
> --------------------------- ONElist Sponsor ----------------------------
>
> What is "FRIENDS & FAMILY?"
> http://www.onelist.com
> It's a new program at ONElist. See homepage for details.
>
> ------------------------------------------------------------------------
> Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> bill,
> List Manager

Discussion Thread

Alan Rothenbush 1999-07-15 10:44:00 UTC Re: Cheap Encoders Brad Heuver 1999-07-15 11:26:49 UTC Re: Cheap Encoders Dan Mauch 1999-07-15 12:41:17 UTC Re: Re: Cheap Encoders Matt Shaver 1999-07-15 13:38:21 UTC Re: Re: Cheap Encoders Matt Shaver 1999-07-15 13:53:57 UTC Re: Re: Cheap Encoders Jon Elson 1999-07-15 14:54:35 UTC Re: Re: Cheap Encoders mike grady 1999-07-15 16:23:02 UTC Re: Re: Cheap Encoders Scott Acorn 1999-07-15 18:05:44 UTC Re: Re: Cheap Encoders Don Hughes 1999-07-15 21:23:33 UTC Re: Re: Cheap Encoders Jim GREGG 1999-07-15 21:46:39 UTC Re: Re: Cheap Encoders Don Hughes 1999-07-15 21:51:28 UTC Re: Re: Cheap Encoders WAnliker@x... 1999-07-15 21:53:53 UTC Re: Re: Cheap Encoders Jon Elson 1999-07-15 22:27:37 UTC Re: Re: Cheap Encoders Don Hughes 1999-07-15 22:20:10 UTC Re: Re: Cheap Encoders John Grant 1999-07-15 23:52:51 UTC Re: Re: Cheap Encoders