Re: [CAD_CAM_EDM_DRO] Electronics wiring and boxing?

Randy,

Try finding an "external drive" box for SCSI or similar drives. The one
I have even has power connections and a fan. For Wiring info, look for
an ARRL handbook at your library, or the ARRL.

Alan, KM6VV


Randy Gordon-Gilmore wrote:

>
> I have the electronics (Dan Mauch 2A driver board) and power supplies (24V
> 8.5A in a PC power supply-sized case for the motors and small open-frame 5V
> for the logic) for my Sherline mill, and need to house and wire them.
>
> Does anyone know a good source for project boxes that don't cost and arm
> and a leg? I need about 13W x 7D x 6H.
>
> My other question is, is some place that explains "neat" cabling practice?
> When I wire stuff it looks like a bird's nest, but professional equipment
> is always neat looking. Things like, how I wire one 115V power inlet to
> several points inside, or the 24V outlet to three different axes...
>
> Thanks for any pointers,
>
> Randy