Re: Servo survey.

If you have the curves for this motor give me about 4 points of
torque verses rpm. 2 points on the 2 ends of the curve and 2 middle
points.

Wally K

--- In CAD_CAM_EDM_DRO@egroups.com, r_fl_z@h... wrote:
> The servos are ones being sold by Dan (Camtronics). They are
Clifton
> Precision C23-L55-W30 series. Published specs are: peak torque =
430
> oz.in., continuous torque = 50 oz.in., terminal resistance = 3.8
> ohms, peak current = 20 amp.
>
> They're advertised as 24V, however the data sheet shows them as 36V.
>
> I'm planning a 5/.2 ball screw and 1:1 drive.
>
> I was initially attracted to them because of the low cost and
> advertised high torque. However, not being well versed in the load
> profile for servos, I am now concerned seeing the torque curve max
> out at 200 oz.in.
>
> Any and all input is appreciated.
>
> Ron
>
>
>
> --- In CAD_CAM_EDM_DRO@egroups.com, "Wally K" <cnc4me@u...> wrote:
> > Ron, leave the specs of your servo. like torque, RPM, current,
> > voltage, manufacture name, model number ect. This will help
people
> > figure out what you have.
> >
> > Wally K.
> >
> >
> > --- In CAD_CAM_EDM_DRO@egroups.com, r_fl_z@h... wrote:
> > > In an effort to ensure the correct choice of servos for my 3-
axis
> > > machine, I'd like to hear what motor sizes are being used for
the
> > > axis drives by list members who are using servos.
> > >
> > > Regards,
> > > Ron