Re: Servo survey.

The servos are ones being sold by Dan (Camtronics). They are Clifton
Precision C23-L55-W30 series. Published specs are: peak torque = 430
oz.in., continuous torque = 50 oz.in., terminal resistance = 3.8
ohms, peak current = 20 amp.

They're advertised as 24V, however the data sheet shows them as 36V.

I'm planning a 5/.2 ball screw and 1:1 drive.

I was initially attracted to them because of the low cost and
advertised high torque. However, not being well versed in the load
profile for servos, I am now concerned seeing the torque curve max
out at 200 oz.in.

Any and all input is appreciated.

Ron

--- In CAD_CAM_EDM_DRO@egroups.com, "Wally K" <cnc4me@u...> wrote:
> Ron, leave the specs of your servo. like torque, RPM, current,
> voltage, manufacture name, model number ect. This will help people
> figure out what you have.
>
> Wally K.
>
>
> --- In CAD_CAM_EDM_DRO@egroups.com, r_fl_z@h... wrote:
> > In an effort to ensure the correct choice of servos for my 3-axis
> > machine, I'd like to hear what motor sizes are being used for the
> > axis drives by list members who are using servos.
> >
> > Regards,
> > Ron