CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: Andy Olney's Comments on PIC-Servo

Posted by Dan Mauch
on 1999-07-19 07:14:09 UTC
If someone will give me a schematic I will build it.
Dan
-
> B. If you want servo motors (or already have a servo motor equipped mill
to
>retrofit), and don't want to spring for the Servo-To-Go board
(understandable
>at $888) consider helping pitch in to develop a clone. I'm interested in
>doing this myself and I think we've got a head start with the DRO board. We
>would need to add a D/A board, but the software modifications would be less
>drastic than developing a serial port connected controller. Once it works
we
>might be able to get Dan & Tom to add the circuitry to their next batch of
>boards.
>

Discussion Thread

Matt Shaver 1999-07-19 00:12:12 UTC Re: Andy Olney's Comments on PIC-Servo Dan Mauch 1999-07-19 07:14:09 UTC Re: Re: Andy Olney's Comments on PIC-Servo Bob Bachman 1999-07-19 13:02:50 UTC Re: Re: Andy Olney's Comments on PIC-Servo Andy Olney 1999-07-19 21:44:58 UTC Re: Re: Andy Olney's Comments on PIC-Servo Tom Kulaga 1999-07-20 22:26:58 UTC Re: Andy Olney's Comments on PIC-Servo Mike Gann 1999-07-21 08:28:14 UTC Re: Re: Andy Olney's Comments on PIC-Servo Ted Robbins 1999-07-21 08:19:21 UTC Re: Re: Andy Olney's Comments on PIC-Servo Dan Mauch 1999-07-21 08:45:34 UTC Re: Re: Andy Olney's Comments on PIC-Servo Elliot Burke 1999-07-21 21:18:55 UTC re:Re: Re: Andy Olney's Comments on PIC-Servo