Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Posted by
Smoke
on 2000-12-14 21:36:51 UTC
Sounds like a good idea to adapt that air powered hand engraver tool then.
It uses collets and runs at...hey, I forget exactly what mine runs at but I
do recall it's in the >100,000 range.
I do you get the CNC to peck drill 4 or 5 holes a sec. You'd really need
some fast X-Y feed rates.
Smoke
It uses collets and runs at...hey, I forget exactly what mine runs at but I
do recall it's in the >100,000 range.
I do you get the CNC to peck drill 4 or 5 holes a sec. You'd really need
some fast X-Y feed rates.
Smoke
Discussion Thread
Wally K
2000-12-14 20:11:55 UTC
High speed spindle chuck
Tim Goldstein
2000-12-14 20:31:06 UTC
RE: [CAD_CAM_EDM_DRO] High speed spindle chuck
Smoke
2000-12-14 21:09:07 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
JanRwl@A...
2000-12-14 21:25:05 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Smoke
2000-12-14 21:36:51 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
JanRwl@A...
2000-12-14 21:44:51 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Smoke
2000-12-14 22:07:02 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Jon Elson
2000-12-14 22:08:32 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Greg Nuspel
2000-12-15 03:39:46 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Jon Elson
2000-12-15 12:00:31 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Jon Elson
2000-12-15 12:07:12 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Smoke
2000-12-15 12:09:11 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Jon Elson
2000-12-15 13:51:57 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Wally K
2000-12-15 14:54:35 UTC
Re: High speed spindle chuck
Smoke
2000-12-15 16:07:10 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Jon Elson
2000-12-15 23:12:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: High speed spindle chuck
diazden
2000-12-16 22:14:07 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck
Smoke
2000-12-16 22:59:34 UTC
Re: [CAD_CAM_EDM_DRO] High speed spindle chuck