CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] High speed spindle chuck

Posted by Jon Elson
on 2000-12-15 13:51:57 UTC
Smoke wrote:

> Sounds mighty expen$ive!
>
> I'll need to stick primarily with stuff that will be affordable to us
> hobbyists!

Obviously! I was lucky enough to get a pair of Westwind spindle
motors from somebody who didn't know what they were worth!
They aren't that common on the surplus market. Drilling holes down
to about .025" isn't that tough, but when the drills get smaller than
that, breakage can be caused by minute vibrations or runout
in the drilling spindle. In an Excellon drilling machine, supposedly
these spindles are capable of drilling .013" holes all day long.
I have no idea what I can get from my setup on a Bridgeport, but
I HAVE drilled .018" holes in PC boards with good results, and
no broken drills.

Jon

Discussion Thread

Wally K 2000-12-14 20:11:55 UTC High speed spindle chuck Tim Goldstein 2000-12-14 20:31:06 UTC RE: [CAD_CAM_EDM_DRO] High speed spindle chuck Smoke 2000-12-14 21:09:07 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck JanRwl@A... 2000-12-14 21:25:05 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Smoke 2000-12-14 21:36:51 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck JanRwl@A... 2000-12-14 21:44:51 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Smoke 2000-12-14 22:07:02 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Jon Elson 2000-12-14 22:08:32 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Greg Nuspel 2000-12-15 03:39:46 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Jon Elson 2000-12-15 12:00:31 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Jon Elson 2000-12-15 12:07:12 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Smoke 2000-12-15 12:09:11 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Jon Elson 2000-12-15 13:51:57 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Wally K 2000-12-15 14:54:35 UTC Re: High speed spindle chuck Smoke 2000-12-15 16:07:10 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Jon Elson 2000-12-15 23:12:53 UTC Re: [CAD_CAM_EDM_DRO] Re: High speed spindle chuck diazden 2000-12-16 22:14:07 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck Smoke 2000-12-16 22:59:34 UTC Re: [CAD_CAM_EDM_DRO] High speed spindle chuck