Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Posted by
Smoke
on 2000-12-14 22:04:50 UTC
Just looking at some bearing catalogs....it seems the bearings are rated to
run faster in oil mist than any other form of lube.
That DTBG grease sounds like it would be really great for a "one shot lube
system installed on these "little" machines I'm designing.
Smoke
run faster in oil mist than any other form of lube.
That DTBG grease sounds like it would be really great for a "one shot lube
system installed on these "little" machines I'm designing.
Smoke
Discussion Thread
ballendo@y...
2000-12-14 15:35:36 UTC
lubricants was Re: Re: spindle motors
Doug Harrison
2000-12-14 17:48:12 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Smoke
2000-12-14 18:00:19 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Smoke
2000-12-14 18:22:52 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
dave engvall
2000-12-14 21:08:22 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Jon Elson
2000-12-14 21:54:46 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Smoke
2000-12-14 22:04:50 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Smoke
2000-12-14 22:08:46 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Jon Elson
2000-12-15 12:08:56 UTC
Re: [CAD_CAM_EDM_DRO] lubricants was Re: Re: spindle motors
Geoff Bullough
2000-12-16 01:25:12 UTC
Re: lubricants was Re: Re: spindle motors
Jon Elson
2000-12-16 21:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: lubricants was Re: Re: spindle motors