CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] 1/8" Shank, 1/8" Diameter Spiral Upcut bit source?

Posted by Marcus & Eva
on 2001-01-31 18:42:49 UTC
Hi Tracy:
Get yourself some carbide endmills.
Garr or MA Ford are good brands.
They are the same price as HSS endmills in the smaller sizes and the 1/8 dia
is also 1/8 shank.
They also have the added benefit of being a lot more rigid than HSS cutters,
especially noticeable when you stick them out a long way from the collet
nose.
Any big tool supply house will have them.
Cheers

Marcus
-----Original Message-----
From: tnorris@... <tnorris@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Wednesday, January 31, 2001 12:46 PM
Subject: [CAD_CAM_EDM_DRO] 1/8" Shank, 1/8" Diameter Spiral Upcut bit
source?


>Gentlemen,
>
> Does anyone have a source for a 1/8" Shank, 1/8" Diameter Spiral
>Upcut bit? I've searched everywhere and can't seem to find one. The
>closest I've come is a 1/4" shank, 1/8" diameter upcut bit. The shank
>needs to be 1/8" as well as I'm milling down about two inches on a
>MaxNC-10 mill.
>
>Any help would be appreciated!
>
>Tracy Norris
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html

Discussion Thread

tnorris@h... 2001-01-31 12:46:54 UTC 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? Tim Goldstein 2001-01-31 13:30:40 UTC Re: [CAD_CAM_EDM_DRO] 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? tnorris@h... 2001-01-31 14:56:41 UTC Re: 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? ballendo@y... 2001-01-31 16:26:14 UTC Re: 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? tnorris@h... 2001-01-31 17:08:27 UTC Re: 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? Marcus & Eva 2001-01-31 18:42:49 UTC Re: [CAD_CAM_EDM_DRO] 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? dave engvall 2001-01-31 19:31:31 UTC Re: [CAD_CAM_EDM_DRO] 1/8" Shank, 1/8" Diameter Spiral Upcut bit source? Jon Elson 2001-01-31 23:24:31 UTC Re: [CAD_CAM_EDM_DRO] 1/8" Shank, 1/8" Diameter Spiral Upcut bit source?