CAD CAM EDM DRO - Yahoo Group Archive

re: dans' mill/drill quill retrofit

Posted by ballendo@y...
on 2001-02-03 17:48:25 UTC
Dan,

Since you're not marketing this... How about telling/ showing us how
you did it (quill)???

Also, are your ballscrews 5tpi? standard or anti-backlash nuts?

Thank You in advance.

Ballendo

>I am most proud of solving the mil/drill quill backlash problem
>without having to put an external ballscrew on the quill. My x-y
>axis have about .002 backlash and the last time I checked it the
>quill had .0019 backlash.
>I was going to come out with a retrofit kit for the XY conversion to
>ballscrews and the quill fix but there was only one or two guys
>interested.
>So I drop the project.
>Dan

Discussion Thread

ballendo@y... 2001-02-03 17:48:25 UTC re: dans' mill/drill quill retrofit Dan Mauch 2001-02-04 07:15:47 UTC Re: [CAD_CAM_EDM_DRO] re: dans' mill/drill quill retrofit dougrasmussen@c... 2001-02-04 11:01:18 UTC Re: dans' mill/drill quill retrofit Dan Mauch 2001-02-04 12:34:01 UTC Re: [CAD_CAM_EDM_DRO] Re: dans' mill/drill quill retrofit ballendo@y... 2001-02-04 16:06:03 UTC Re: dans' mill/drill quill retrofit dougrasmussen@c... 2001-02-04 19:47:26 UTC Re: dans' mill/drill quill retrofit