CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Slow List Computer set up question.

Posted by Rich D.
on 2001-02-06 09:59:16 UTC
Jeff and Bill,
CNC Pro works very well in windows 95's DOS mode. The CNC Pro installation and
first run sets it up automatically. I'm not saying it works in the dos box (dos
prompt) mode. When you close CNC Pro, return to windows is automatic.
Also, if using win 95 (or 98 too, I beleive) you can install MS PowerToys (free
download) to give the option of displaying the boot menu at start up for as long
as you want. Chose DOS, windows, safe mode, etc.
Rich D. Doin'it every day.


Jeff Demand wrote:
>
> Bill
> I'm not proposing this as the best way, it is 'A' way which works for me.
> I use CNCPRO under DOS and Win95 the rest of the time. It is also possible
> to have at least half a network connection while running pure dos but
> setting up a dual boot capability is the first step.
>
> 1. install DOS
> 2. install Win??
> 3. make sure Win works
> 4. change c:\msdos.sys attributes by removing 'read only" and 'hidden" in
> properties
> 5. Edit msdos.sys to include [Options]
> BootDelay=?? ;number of seconds
> BootMenu=1
> BootMulti=1
> 6. restore attributes.
>
> This Should give you the option of using Old Dos 6.22 when you boot, with
> a default to Win after ?? seconds.
>
> Jeff
>
> At 10:22 AM 02/06/2001 EST, you wrote:
> >
> >I am setting up a computer for the shop, primarily for Vector, and CNCPRO.
> I
> >have DOS 6.22, Win 95, and Win 98 available. The HD is empty. How is the
> >best way to set up the computer for these two programs?
> >
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html

--
-==Rich=-=Colorado Midland Railway=-=<http://www.geocities.com/cmsteam/>

Discussion Thread

wanliker@a... 2001-02-06 07:23:04 UTC Slow List Computer set up question. Henrik Olsson 2001-02-06 08:44:26 UTC Re: [CAD_CAM_EDM_DRO] Slow List Computer set up question. Jeff Demand 2001-02-06 08:46:21 UTC Re: [CAD_CAM_EDM_DRO] Slow List Computer set up question. Rich D. 2001-02-06 09:59:16 UTC Re: [CAD_CAM_EDM_DRO] Slow List Computer set up question. Ian Wright 2001-02-06 10:06:24 UTC Re: [CAD_CAM_EDM_DRO] Slow List Computer set up question. James Owens 2001-02-06 10:30:31 UTC Re: [CAD_CAM_EDM_DRO] Slow List Computer set up question.