CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters

Posted by Helen Fahy
on 2001-02-12 20:32:54 UTC
Hi Jay,

I am considering using a rack & pinion system for my machine due to the
16'-20' x axis dimension. Did you use any of the zero backlash hardware,
split pinions, harmonic gear drives,.. in your design? What kind of
tolerance and repeatability does your system maintain?

Thanks for any guidance,

Joe Fahy

----- Original Message -----
From: "Jay Hayes" <xmas4lites@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, February 12, 2001 7:38 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters


>
> If you've seen a plasma cutter then you have also seen all the particulate
slag and grit that is generated. This grit can play havoc
> with any type of screw. A better solution is a rack and pinion drive. If
the teeth on the rack are positioned vertically or upside
> down the grit problem is minimized. Racks can also be of unlimited length.
Screws on the other hand suffer from whip lash at longer
> lengths. My 72 x 126 inch CNC plasma, with rack and pinion drive, holds
the same tolerances it did when it was new fifteen years
> ago.
>
> Jay Hayes
>
> Smoke wrote:
>
> > I'm just wondering...I've seen plasma cutters in use. It appears to me
any
> > attempts to hold
> > REALLY CLOSE tolerances seems to be a lot of overkill. I've never seen
a
> > plasma cutting torch
> > yet that will cut a really smooth edge, hence the lack of necessity for
> > holding close tolerances.
> >
> > With this though in mind, i don't see why a person couldn't use threaded
rod
> > for the lead screw?
> > Manufacturing an "antibacklash nut for this would be as simple as
placing a
> > heavy spring between
> > a couple of hex nuts which are trapped to prevent rotation.
> >
> > I've even seen commercial nuts (used on acme screws) made this way.
> >
> > Smoke
> >
> > -----Original Message-----
> > From: ozzietwo2001@... <ozzietwo2001@...>
> > To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Date: Sunday, February 11, 2001 10:22 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: MillWizard + MaxNC-10, SuperCam &
> > Millwizard...
> >
> > >Tracy,
> > >I've found the website for Techno-isel and have found mountains of
> > >interesting stuff, but it's daunting to try wading through it all.
> > >Can you give us an idea of prices; for instance your 20" table, and
> > >if you know, ball screw and nut prices.
> > >
> > >Thanks,
> > >Jerry
> > >
> > >
> > >
> > >
> > >One major "upgrade" I've
> > >> made is using 20" X & Y tables from techno-isel to give me more
> > >area
> > >> to work with. It works great but really needs stronger stepper
> > >motors
> > >
> > >
> > >
> > >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> > discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> > >
> > >Addresses:
> > >Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> > >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > >Moderator: jmelson@... timg@... [Moderator]
> > >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >bill,
> > >List Manager
> > >
> > >FAQ: http://www.ktmarketing.com/faq.html
> > >
> > >
> >
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>

Discussion Thread

Smoke 2001-02-12 15:41:56 UTC Re: Ball screws for CNC plasma cutters Tim Goldstein 2001-02-12 15:52:25 UTC RE: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Jay Hayes 2001-02-12 16:37:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Helen Fahy 2001-02-12 20:32:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Jay Hayes 2001-02-12 22:28:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Helen Fahy 2001-02-13 03:27:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Joe Vicars 2001-02-13 05:23:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Sven Peter, TAD S.A. 2001-02-13 10:44:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Rich D. 2001-02-13 12:31:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Sven Peter, TAD S.A. 2001-02-14 03:57:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Sven Peter, TAD S.A. 2001-02-14 05:31:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Smoke 2001-02-14 14:45:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Smoke 2001-02-15 20:15:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters ballendo@y... 2001-02-15 22:22:40 UTC re:Re: Ball screws for CNC plasma cutters Tom Eldredge 2001-02-16 03:32:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws for CNC plasma cutters Ian Wright 2001-02-16 05:37:25 UTC Re: [CAD_CAM_EDM_DRO] re:Re: Ball screws for CNC plasma cutters Smoke 2001-02-16 13:08:28 UTC Re: [CAD_CAM_EDM_DRO] re:Re: Ball screws for CNC plasma cutters ballendo@y... 2001-02-16 16:04:05 UTC nut backlash comp. was re:Re: Ball screws for CNC plasma cutters ballendo@y... 2001-02-16 17:15:47 UTC backlash comped nut design re:Re: Ball screws for CNC plasma cutters Smoke 2001-02-16 20:48:30 UTC Re: [CAD_CAM_EDM_DRO] backlash comped nut design re:Re: Ball screws for CNC plasma cutters Ian Wright 2001-02-17 03:54:47 UTC Re: [CAD_CAM_EDM_DRO] nut backlash comp. was re:Re: Ball screws for CNC plasma cutters