Re: [CAD_CAM_EDM_DRO] Re:Alternative Stepper Motor mountings, etc.
Posted by
Jeff Demand
on 2001-02-14 05:43:47 UTC
Rab
Tygon is a brand name for a clear plastic tubing. MSC lists it but the
stuff at your local hardware store will probablely work. You need something
with a thick enough wall, fairly stiff and which will grip the shafts.
Experiment, mine is out of my junk box so I can't be sure of its brand. I
used Tygon more as a generic description.
Jeff
At 08:32 AM 02/14/2001 -0000, you wrote:
Tygon is a brand name for a clear plastic tubing. MSC lists it but the
stuff at your local hardware store will probablely work. You need something
with a thick enough wall, fairly stiff and which will grip the shafts.
Experiment, mine is out of my junk box so I can't be sure of its brand. I
used Tygon more as a generic description.
Jeff
At 08:32 AM 02/14/2001 -0000, you wrote:
>Jeff,
>
>Is Tygon some brand name of flexable plastic ?
>Sounds cheap and simple compared with the helical couplers.
>
>Rab
>
>> Even lower tech than a "slitted" coupler is a piece of Tygon or
>similer
>> tubing. A mm or so between shafts compensates for miss-alignment
>and with
>> fine pitch screws any wind up is small and elastic.
>> If you are worried about this check out the price on helical
>couplers :-{
>>
>> Jeff
Discussion Thread
rab@r...
2001-02-13 13:09:22 UTC
Alternative Stepper Motor mountings, etc.
Alan Marconett KM6VV
2001-02-13 13:42:22 UTC
Re: [CAD_CAM_EDM_DRO] Alternative Stepper Motor mountings, etc.
Jeff Demand
2001-02-13 14:48:44 UTC
Re:Alternative Stepper Motor mountings, etc.
davemucha@j...
2001-02-13 14:53:38 UTC
Re: Alternative Stepper Motor mountings, etc.
rab@r...
2001-02-14 00:32:03 UTC
Re:Alternative Stepper Motor mountings, etc.
rab@r...
2001-02-14 00:38:41 UTC
Re: Alternative Stepper Motor mountings, etc.
Jeff Demand
2001-02-14 05:43:47 UTC
Re: [CAD_CAM_EDM_DRO] Re:Alternative Stepper Motor mountings, etc.
ballendo@y...
2001-02-15 01:32:39 UTC
Re: Alternative Stepper Motor mountings, etc.
ballendo@y...
2001-02-15 01:54:35 UTC
Re:Alternative Stepper Motor mountings, etc.
davemucha@j...
2001-02-15 08:34:21 UTC
Re: Alternative Stepper Motor mountings, etc.
Sven Peter, TAD S.A.
2001-02-15 11:18:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Alternative Stepper Motor mountings, etc.
ballendo@y...
2001-02-15 21:41:20 UTC
Re: Alternative Stepper Motor mountings, etc.
rab@r...
2001-02-16 02:10:43 UTC
Re: Alternative Stepper Motor mountings, etc.
ballendo@y...
2001-02-16 15:29:27 UTC
Re: Alternative Stepper Motor mountings, etc.