Re: [CAD_CAM_EDM_DRO] aggregate machine parts was Re: bake-on epoxy

Tim:

can I post these links by simply going to the web site and listing them?

Smoke
-----Original Message-----
From: Tom Eldredge <harmonyt@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Monday, February 12, 2001 10:11 PM
Subject: Re: [CAD_CAM_EDM_DRO] aggregate machine parts was Re: bake-on epoxy

>Smoke,
>
>I would like to take a look at that list of links relating to casting and
>mold making..
>
>Tom Eldredge, Trustee
>----- Original Message -----
>From: Smoke <gordonr@...>
>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>Sent: Monday, February 12, 2001 5:39 PM
>Subject: Re: [CAD_CAM_EDM_DRO] aggregate machine parts was Re: bake-on

epoxy

>
>
>> I have a long list of sites to visit for casting and mold making. I
>haven't
>> posted any of them here in the interested of staying with CAD/CAM/CNC.
>>
>> I can post them at my HomeFoundry site if anyone's interested?
>> Smoke
>> -----Original Message-----
>> From: rfs@... <rfs@...>
>> To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
>> Date: Sunday, February 11, 2001 9:44 PM
>> Subject: [CAD_CAM_EDM_DRO] aggregate machine parts was Re: bake-on epoxy
>>
>>
>> >Thanx for the website. Looks promising. I will have to give them a
>> >call to see what is possible. Regards....Richard.
>> >
>> >--- In CAD_CAM_EDM_DRO@y..., "Vance Buhler" <vbuhler@v...> wrote:
>> >> Another site to look at is www.smooth-on.com/ They have a variety
>> >of products and mold materials including C1508 an Aluminum filled
>> >Urethane that is thin enough in it's liquid state so that you could
>> >add e-glas or carbon fibre re-inforcemet to it for added tensile
>> >strength
>> >
>> >
>> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>> >
>> >Addresses:
>> >Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>> >Moderator: jmelson@... timg@... [Moderator]
>> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> >bill,
>> >List Manager
>> >
>> >FAQ: http://www.ktmarketing.com/faq.html
>> >
>> >
>>
>>
>> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>>
>> Addresses:
>> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>> Moderator: jmelson@... timg@... [Moderator]
>> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> bill,
>> List Manager
>>
>> FAQ: http://www.ktmarketing.com/faq.html
>>
>>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>