Re: shakin!
Posted by
mariss92705@y...
on 2001-02-28 17:37:03 UTC
Hi,
I was running the pick and place machine today. It miss-placed 2 chip
resistors at 11:17AM. I didn't feel anything here in Orange County,
Ca. but seismic waves propogate at 3,000 MPH if I remember correctly.
1,000 miles more or less from here to Seattle, 20 min at that rate,
added to 10:55AM is about right. Coincidence?
Mariss
I was running the pick and place machine today. It miss-placed 2 chip
resistors at 11:17AM. I didn't feel anything here in Orange County,
Ca. but seismic waves propogate at 3,000 MPH if I remember correctly.
1,000 miles more or less from here to Seattle, 20 min at that rate,
added to 10:55AM is about right. Coincidence?
Mariss
--- In CAD_CAM_EDM_DRO@y..., carlcnc@s... wrote:
> any one else in the Seattle area?
> hope you came thru ok,sure made for some fast old guys going out
the
> door.
> disrupted my whole day ,at least i didn't have any thing critical
on
> the cnc.
>
> CB
Discussion Thread
carlcnc@s...
2001-02-28 16:29:42 UTC
shakin!
mariss92705@y...
2001-02-28 17:37:03 UTC
Re: shakin!
wanliker@a...
2001-02-28 17:51:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: shakin!
mariss92705@y...
2001-02-28 19:32:51 UTC
Re: shakin!
dave engvall
2001-02-28 19:50:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: shakin!
Brian Pitt
2001-02-28 21:43:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: shakin!
Dan Mauch
2001-03-01 06:34:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: shakin!
LtCdr ChonBey vestai-Qul
2001-03-01 12:57:56 UTC
Re: shakin!
dave engvall
2001-03-01 15:04:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: shakin!
LtCdr ChonBey vestai-Qul
2001-03-04 08:18:49 UTC
Re: shakin!