Re: [CAD_CAM_EDM_DRO] Re: Muller

Opps! You're right!


Smoke
-----Original Message-----
From: ballendo@... <ballendo@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Friday, March 16, 2001 6:58 AM
Subject: [CAD_CAM_EDM_DRO] Re: Muller

>Smoke,
>
>I think you've got your riddle mixed up with your muller!
>
>The riddle is the sifter; the muller is the mixer.
>
>Hope this helps.
>
>Ballendo
>
>P.S. A mullers' job is not to "blend" but to "coat" the sand grains
>evenly with the binder (traditionally clay, nowadays synthetic). The
>difference is subtle, but important. The grains are "rubbed" into the
>binder, rolling as they do so. Point of all this is too make the sand
>hold its' shape in the mold.
>
>> No...they are basically just a big screen made from small mesh
>>1/4" or so) hardware cloth for "sifting the sand used in sand
>>asting to break up any clods that develop in the sand pile.
>> Smoke
>
>>>All this talk about mullers and I'd never even heard of one until
>>>you started posting about them. I understand they're used for
>>>preparing sand's but are they basically a big food blender for sand?
>>>John
>
>
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>