Re: [CAD_CAM_EDM_DRO] First angle and Third angle

You miss my point. A Standard is a STANDARD because most people use it.
Metric has become an ipso-facto standard in most things mechanical these
days. You can't buy truly hi-tech anymore if not in metric. Look for an
imperial screw in anything from MRI's to VCR's to computers, to most
machines, and you'll only find it typically in low end systems. At least
thats my experience.

Art

----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, March 26, 2001 11:51 AM
Subject: RE: [CAD_CAM_EDM_DRO] First angle and Third angle


> This does not seem like a very good reason to make a decision. Based upon
> the same reasoning we should all ditch our CNC machines and buy big screen
> TVs. After all, more people have big screens than CNC.
>
> Tim
> [Denver, CO]
>
> > Hmm, how
> > many countries are
> > metric versus imperial again?
> >
> > just a thought.
> > Art
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>