Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Posted by
Ian Wright
on 2001-03-27 12:04:57 UTC
----- Original Message -----
From: "Matt Shaver" <mshaver@...>
>
> Then why not change time? Aside from days and years, which are fixed by
> astronomical time bases thus far outside our control, the current
> divisions of time are arbitrarily Imperial.
Hi,
King Louis X1V of France tried this and it didn't catch on. They went
through a period of about a year during which time was metricated by royal
decree and clocks were made with 10 hour dials and there were 100 minutes in
an hour and 100 seconds in a minute. No one could cope with the change and
they soon reverted to the 'normal' time system (which was first invented by
the Babylonians as far as is known). If you can find any of these metric
clocks they are worth a fortune.
The biggest arguement for all the pre-existing measurement systems is that
they are/were easy to relate to - everyone carried them around with them. A
second is close to a heartbeat, an inch the length from the tip of the thumb
to the first knuckle, a 'hand' (as in horse measurement) 4" the width of the
palm, a foot as described or approximately the length of the forearm, a yard
from the tip of the fingers to the nose on an outstretched arm or a 'pace',
a fathom (6 ft) the distance between outstretched fingertips etc. Perhaps
when they start making metric people the 'new ideas' will catch on
universally ;o)
Ian
--
Ian W. Wright
Sheffield UK
www.iw63.freeserve.co.uk
Discussion Thread
Peter Chen
2001-03-24 15:13:42 UTC
First angle and Third angle
John Stevenson
2001-03-24 15:48:15 UTC
Re: First angle and Third angle
Ian Wright
2001-03-24 16:25:29 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Smoke
2001-03-25 09:42:04 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Matt Shaver
2001-03-25 23:08:12 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Smoke
2001-03-26 11:31:10 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Art Fenerty
2001-03-26 11:45:34 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Tim Goldstein
2001-03-26 11:51:41 UTC
RE: [CAD_CAM_EDM_DRO] First angle and Third angle
Smoke
2001-03-26 12:13:30 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Art Fenerty
2001-03-26 14:01:47 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
jesse
2001-03-26 18:23:30 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Jerry Kimberlin
2001-03-26 18:29:14 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Matt Shaver
2001-03-26 23:29:01 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Vance Buhler
2001-03-27 00:34:54 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
e.heritage@b...
2001-03-27 08:57:08 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Graham Hollis
2001-03-27 10:09:07 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
John Stevenson
2001-03-27 11:06:20 UTC
Re: First angle and Third angle
Ian Wright
2001-03-27 12:04:57 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Art Fenerty
2001-03-27 15:56:35 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Ian Wright
2001-03-28 02:52:24 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Ray
2001-03-28 06:48:21 UTC
Re: Re: First angle and Third angle
Tony Jeffree
2001-03-28 23:44:53 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
Ian Wright
2001-03-29 00:54:25 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
dave engvall
2001-04-02 21:23:53 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle
dave engvall
2001-04-02 21:31:17 UTC
Re: [CAD_CAM_EDM_DRO] First angle and Third angle