Re: Benchtop CNC

The drivers are 5A per phase @36VDC.
It's on my web page.
Dan
-----Original Message-----
From: CG <cnk@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Sunday, August 22, 1999 12:33 PM
Subject: [CAD_CAM_EDM_DRO] Benchtop CNC

>From: "CG" <cnk@...>
>
>Dan (Falk) -
>
>This is exactly the kind of feedback I hoped for. The Rong Fu machine you
>mention is very nice, and would make a sweet CNC conversion. I think I ran
>across it a few months ago, but the price tag scared me off. I saw it
>listed for around $3300 (Salesco, I think,
>http://www.salesco.com/TOOLS/metal/drill/geared_head_series_a.htm as
>mentioned by Peter). I tried finding more info on the one Steve Carlisle
>mentioned from Pyramid Machine Tools, Alberta, Canada, that was priced at
>$3389, but no luck. Can that really be $3389 CANADIAN? That's a big
>difference from what Salesco has listed.
>
>I learned about EMC for the first time right here in this mailing list,

and

>I'm definitely looking into it. I have no experience with Linux, but it
>seems everybody here is really helping each other figure out how to get the
>systems working. I hope there are plans for more than 5000 steps/sec.
>
>Last time I looked at Dan Mauch's site, I don't remember seeing the 5A
>drivers. Are those 5A per phase, or per motor? And, what voltage can they
>handle?
>
>Thanks,
>Carlos
>
>[Attachments have been removed from this message]
>
>--------------------------- ONElist Sponsor ----------------------------
>
>How do you enter ONElist's WEEKLY DRAWING for $100?
>By joining the FRIENDS & FAMILY program. For details, go to
><a href=" http://clickme.onelist.com/ad/Teaser114 ">Click Here</a>
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>