Re: Digest Number 140

Im always like tricks. Let's hear it.
Dan
-----Original Message-----
From: Jon Anderson <janders@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Sunday, August 22, 1999 7:43 PM
Subject: Re: [CAD_CAM_EDM_DRO] Digest Number 140

>From: Jon Anderson <janders@...>
>
>PTENGIN@... wrote:
>
>> I think it is called Moglice?
>
>
>If this is in reference to castable bearing resins, Moglice is correct.
>I've used it several times. My first application was to cast a new nut
>for a DoAll surface grinder. DoAll wanted $1800 for a new crossfeed
>screw/nut. I had a shop in the mid-west custom grind a 1"-10 acme screw
>to my specs, and I bored out the nut, coated the screw with release, and
>injected Moglice with everything in place.
>I've also made some nuts for my MaxNC with Moglice, and having some
>extra, quickly coated a length of linear bearing shafting with release,
>secured a short length of tubing with clay, and filled. This made the
>smoothest, slickest plain bearing I have ever felt.
>It's available in a paste form also, that stays in place pretty well.
>Bought mine from Devitt Machinery. Can't find the number just now, but
>will look for it if anyone is interested.
>Anyone interested in casting nuts, let me know, there's a trick...
>
>
>Jon Anderson
>
>--------------------------- ONElist Sponsor ----------------------------
>
>Show your ONElist SPIRIT!
><a href=" http://clickme.onelist.com/ad/tshirt2 ">Click Here</a>
>With a new ONElist SHIRT available through our website.
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>